Processing materialsChipbreakersIntroductionVcFnAp
Stainless steelCNMG-SF.png

SF

SF Chipbreaker, with sharp cutting edge, matching R0.4 arc angle to achieve high surface finishing. it is suitable for finishing machining of stainless steel continuous cutting.130(60-200)0.1(0.05-0.3)0.5(0.1-0.8)
CNMG-MF.png

MF

MF chipbreaker, ensures sharpness and increased Strengthens of the cutting edges. With high versatility ,it is suitable for continuous machining of stainless steel.130(60-200)0.1(0.05-0.3)1.0(0.2-2.0)
CNMG-FM.png

FM

FM chipbreaker, enhances strengthens of cutting edges based on MF chipbreaker. With high versatility ,it is suitable for general machining of stainless steel.130(110-200)0.1(0.05-0.3)1.5(0.2-2.0)
CNMG-MM.png

MM

MM chipbreaker, enhances the strengthens of cutting edges. It is suitable for stainless steel intermittent cutting.130(110-200)0.1(0.05-0.3)1.5(0.2-2.0)
CCMT-TT.png

TT

TT Chipbreaker,ensures sharpness and increase strengthens of the cutting edges.It is the general choice for stainless steel internal hole machining.130(80-200)0.1(0.05-0.3)1.0(0.1-2.0)
SteelCNMG-PMF.png

PMF

PMF chipbreaker, with small cutting force and high surface finishing, it is the idea chipbreaker for finishing and semi-finishing machining of steel.200(160-320)0.2(0.05-0.4)1.0(0.1-1.5)
CNMG-WM.png

WM

WM chipbreaker, With higher strength than PMF chipbreaker, wider chip breaking range,and strong versatility, it is suitable for steel machining.200(160-320)0.2(0.05-0.4)1.5(0.1-3.0)
CNMG-GR.png

GR

GR chipbreaker, with high cutting edge strength,it is the first choice for light-load roughing machining of steel.180(160-320)0.2(0.05-0.4)2.0(1.0-4.0)
CNMG-GTR.png

GTR

GTR chipbreaker,single-sided, with strong cutting edges, it is the first choice for heavy-load roughing machining of steel.180(160-320)0.2(0.05-0.4)3.0(2.0-5.0)
CNMG-TM.png

TM

TM chipbreaker,with small cutting force and high strength cutting edges,it is suitable for internal hole machining of steel.200(160-320)0.2(0.05-0.4)1.5(0.1-3.0)
CNMG-HF.png

HM

HM chipbreaker,with high strength cutting edges,it is suitable for internal hole machining of steel and cast iron.200(160-320)0.2(0.05-0.4)1.5(0.1-3.0)
Cast ironCNMG-TC.png

TC

TC chipbreaker,with high strength cutting edges and high versatility, it is suitable for machining of steel and cast iron.200(160-320)0.2(0.05-0.4)1.5(0.1-3.0)
CNMA.png

CNMA

The high strength of the cutting edge is a good way to overcome the bad processing factors such as sand eye and slag in cast iron processing, and the general chipbraeker for cast iron processing.200(160-320)0.2(0.05-0.4)1.5(0.1-4.0)